Water Treatment and Fertigation Support in Las Vegas

We are based in the Las Vegas Valley, and a good deal of our work is within driving distance. That matters more than it sounds, because desert cultivation has a particular set of water problems and because a fertigation fault is not a next-week problem.

What desert source water does to a feed program

Southwest municipal water is typically harder and higher in dissolved solids than water in much of the country. That has direct consequences for a grow.

Hardness minerals concentrate on the reject side of an RO membrane and plate out as scale, which quietly cuts output long before anything looks wrong — which is why antiscalant is not optional here the way it might be elsewhere. High starting dissolved solids also means your recipe is being added on top of a number that is already significant, so the same feed chart behaves differently than it would on soft water.

The one growers most often miss is alkalinity. Water can sit at a comfortable pH and still resist every drop of acid you add, because the bicarbonate buffering it is high. If you are using more pH-down than the chart suggests and getting less movement than expected, alkalinity is usually why.

Emergency service, and what it is actually for

We offer emergency service to cultivators in Las Vegas and the surrounding area. The reason is simple: irrigation faults are time-critical in a way most equipment problems are not. A room that misses feeds is losing crop while you wait, and in a desert climate the margin is thinner still.

Being local means the response is measured in hours rather than in shipping times. Our office hours are Monday to Friday, with a 24/7 emergency line for the faults that cannot wait.

Stock on the shelf

We keep irrigation supplies in stock — tubing, emitters, fittings, filters, regulators — because the part that stops a grow is rarely the expensive one. It is a coupling, a 120-mesh filter element, or a run of poly tubing nobody planned for. Having it locally is the difference between a same-day fix and a week of workarounds.

Service contracts

Facilities differ enough that a standard maintenance plan rarely fits, so contracts are built around what your system actually needs: scheduled filter and membrane servicing, water quality testing, or troubleshooting support. If your operation is straightforward, the contract should be too.

Where else we work

Phoenix is close enough to be a second home, and we support operations across the U.S., Puerto Rico and Costa Rica. The Paragon travels; the local part of the offer is the service response, not the technology.

What we check first in a Valley facility

When we walk a new site here, the same four things account for most of what we find. Hardness and alkalinity in the source water, because that decides whether the feed chart behaves. Whether there is antiscalant ahead of the membranes, because scale is the quiet killer of RO output in this region. Filtration ahead of the drip lines, because emitters block long before anyone notices output has dropped. And pipe sizing, because a system that grew by addition rather than design almost always carries stale volume and uneven pressure down the run.

None of those are expensive to check. All of them are expensive to discover late, which is why a water test and an hour walking the plumbing is usually the cheapest thing a facility can do.

If you are running a facility in the Valley and want someone local who can be on site, get in touch — or start with a water quality test.