Eden Water Technologies - We’re Revolutionizing Water Treatment & Fertigation for Cannabis
We’re Revolutionizing Water Treatment & Fertigation for Cannabis
Frame-Mount High-Capacity Reverse Osmosis System – FMHC Series
Frame-mount high-capacity RO for large facilities — 8,640 to 34,560 GPD. When your canopy outgrows the FMV line, this is the clean-water backbone. Sized to daily demand.
Price range: $19,300.00 through $42,295.00
Description
Clean water at facility scale.
When your canopy pushes past what a high-efficiency unit can keep up with, you need capacity — real gallons per day, delivered consistently, so your storage never runs dry between irrigation events. The FMHC series is built for large commercial grows that live or die on throughput.
The reason to run RO doesn’t change with scale, it gets more important: strip the dissolved solids out of your source water and you feed every plant on a known baseline. Your EC means what you think it means, your recipes repeat, and you’re not chasing water chemistry that drifts with the seasons or the municipal supply. At facility scale, that consistency is the difference between uniform rooms and a patchwork of results.
Size it to your daily demand. Four capacities from 8,640 to 34,560 GPD. Getting this right means matching production to your peak daily water budget with headroom for growth — not just today’s canopy. Frame-mounted for a clean, serviceable install.
Specifying clean-water infrastructure for a build-out or expansion? This is our wheelhouse — we size RO to real cultivation demand and tie it into fertigation downstream. Send us your numbers.
FMHC Series — Specifications
| Model | GPD (up to) | Flow | Membranes | Motor | Pressure | Recovery | Piping (in / waste / prod) | Footprint |
|---|---|---|---|---|---|---|---|---|
| FMHC-1S | 8,640 | 6 gpm | 1 × 8″×40″ | 3 hp | 150 PSI | 80% | 1-1/2″ / 3/4″ / 1″ FPT | 78″ × 40″ × 63″H |
| FMHC-2S | 17,280 | 12 gpm | 2 × 8″×40″ | 5 hp | 150 PSI | 80% | 1-1/2″ / 3/4″ / 1″ FPT | 78″ × 40″ × 63″H |
| FMHC-3S | 25,920 | 18 gpm | 3 × 8″×40″ | 5 hp | 150 PSI | 80% | 1-1/2″ / 3/4″ / 1″ FPT | 78″ × 40″ × 63″H |
| FMHC-4S | 34,560 | 24 gpm | 4 × 8″×40″ | 7.5 hp | 150 PSI | 80% | 1-1/2″ / 3/4″ / 1″ FPT | 78″ × 40″ × 75″H |
All models use 8″×40″ high-efficiency membranes in FRP vessels at 150 PSI, up to 80% recovery. GPD rated at 2,000 ppm feed TDS, 77°F. Voltage: 230V single, 230V 3-phase, or 460V 3-phase.
Standard Features
- 8″×40″ high-efficiency membrane & FRP vessel; product sampling valves per vessel
- Powder-coated steel frame; stainless-steel multi-stage pump & TEFC motor
- SCH 80 PVC piping; product / waste / recycle inline flow meters
- Liquid-filled system pressure gauge & inlet/outlet pre-filter gauges
- SS feed-water inlet solenoid valve; feed-water low-pressure switch
- SS recycle & throttle globe valves; SS waste needle valve; SS Victaulic couplings
- Dual-level float switch for open storage tank; electrical outlet for anti-scalant pump
- High-capacity sediment pre-filter cartridge; small footprint
Electrical Controls
- 4-line LCD display w/ keypad; system ON/OFF; time-delay start
- Product & feed-water TDS monitor; permeate temperature display
- IEC contactor w/ motor overload relay; pre-treatment lock-out
- Tank-full; low-pressure shut-down; hour meter
Options: blending valve, auto hourly flush, permeate purge, product diversion, hi-pressure cut-off, PLC-based control panel, HMI interface, higher operating pressure, UL-listed panel, membrane anti-scalant.
Additional information
| Capacity | FMHC-1S — 8,640 GPD, FMHC-2S — 17,280 GPD, FMHC-3S — 25,920 GPD, FMHC-4S — 34,560 GPD |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.