Description
Feed every plant the same, from the first row to the last.
The Rivulis Supertif is a factory-assembled drip assembly built for one job: dropping precise, repeatable feed into a commercial canopy without the labor of building drippers by hand. Each unit ships complete — pressure-compensating emitter, distribution tube, and stake — so your crew pulls it from the bag, stakes it, and moves on. No barbs to press, no tube to cut.
Why pressure-compensating (PC) matters. A PC emitter holds its rated flow across a wide pressure band, so the plant at the end of a long run gets the same dose as the one at the manifold — even across bench-height changes and elevation. That’s the difference between a uniform table and a canopy that dries out on one side. The Supertif’s self-flushing diaphragm also shrugs off the sediment and salt that clog cheaper emitters.
No-drain (ND) means no waste between shots. These are non-drain assemblies — they shut off cleanly when pressure drops, so lines don’t dribble onto your floor or over-saturate the pots nearest the pump after every cycle. Cleaner shots, less runoff, tighter control over your leaching fraction.
Match the flow rate to the pot and the recipe:
- 0.29 GPH — propagation, small pots, frequent light shots
- 0.53 GPH — the everyday workhorse for most container sizes
- 1.02 GPH — larger containers and faster feeds
- 2.06 GPH — big pots and high-volume irrigation events
Stake & outlet options (choose at checkout): SnapPeg for quick, tool-free staking; BarPeg for a low-profile hold; and Conic-Barb configurations when you’re branching to multiple outlets off a single takeoff.
Sold in 25-packs, in 30″ and 36″ tube lengths, on Rivulis UV-stabilized materials built for long life in bright rooms and greenhouses.
Not sure which flow rate or outlet fits your grow? That’s what we do — we spec and design drip systems for cultivation facilities every day. Reach out and we’ll match the assembly to your pots, spacing, and feed schedule.

Reviews
There are no reviews yet.